Next: 3.1 WinDriver Low-Level Interrupt Up: WinDriver PCI/PCMCIA/ISA v9.01 Low-Level Previous: 2.19 InterruptDisable() Contents

3. Low Level WD_xxx Interrupt Functions

This chapter describes low-level WD_xxx PCI/PCMCIA/ISA WinDriver functions.

****************************************************************************************

NOTE

It is recommended to use the API from WinDriver's WDC library, which provides convenient wrappers to the basic WD_xxx PCI/PCMCIA/ISA API (see the WinDriver PCI Manual).
If you decide not to use the WDC API, consider using the high-level InterruptEnable() [2.18] and InterruptDisable() [2.19] functions instead of directly using the the low-level functions described below.

****************************************************************************************

Subsections

3.1 WinDriver Low-Level Interrupt Calling Sequence
3.2 WD_IntEnable()
3.3 WD_IntWait()
3.4 WD_IntCount()
3.5 WD_IntDisable()

	NOTE
	It is recommended to use the API from WinDriver's WDC library, which provides convenient wrappers to the basic `WD_xxx` PCI/PCMCIA/ISA API (see the WinDriver PCI Manual). If you decide not to use the WDC API, consider using the high-level `InterruptEnable()` [2.18] and `InterruptDisable()` [2.19] functions instead of directly using the the low-level functions described below.